0 مورد 0 ﷼

شما هیچ آیتمی در سبد خریدتان ندارید.

 اتوپایلوت pixhawk به همراه جی پی اس LEA-6H برای مشاهده‌ی تصویر کامل بر روی عکس فوق دابل کلیک کنید

برای نظر دادن به این محصول اولین باشید

اتوپایلوت pixhawk به همراه جی پی اس LEA-6H

pixhawk autopilot With GPS LEA-6H

6.990.000 ﷼

شرح مختصر

خلبان خودکار pixhawk دارای عملکرد بسیار قدرتمند برای انواع هواپیما،مالتی روتور ،قایق و ....
کد محصول: PR-423
تحویل اکسپرس پرومک محصولات به روش های مختلف بسته به موقعیت مکانی شما در کمترین زمان ارسال می کند
تضمین کمترین قیمت ما تضمین می کنیم محصولات عرضه شده در پرومک بالاترین کیفیت و کمترین قیمت می باشد
تضمین اصالت کالا پرومک تمامی محصولات را به صورت مستقیم از شرکت تولید کننده بدون واسط وارد می کند

جزییات

Pixhawk System Features:

The Pixhawk flight controller is a further evolution of the PX4 flight controller system. Pixhawk consists of a PX4-FMU controller and a PX4-IO integrated on a single board with additional IO, Memory and other features
It is highly optimized to provide control and automation for APM flight navigation software with high performance and capacity. Pixhawk allows current APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users
The NuttX real-time operating system, features high performance, flexibility, and reliability for controlling any autonomous vehicle
A Unix/Linux-like programming environment, Integrated multithreading and autopilot functions such as Lua scripting of missions and flight behavior provide powerful development capabilities
A custom PX4 driver layer ensures tight timing across all processes
New peripheral options will include a digital airspeed sensor, support for an external multi-color LED indicator and an external magnetometer
All peripherals are automatically detected and configured

:A very powerful 32-bit processor with an additional failsafe backup controller and extensive memory

STM32F427 32-bit primary microcontroller: 168 MHz, 252 MIPS, Cortex M4 core with a floating point unit
Two megabytes of Flash program memory and 256 kilobytes of RAM
STM32F103 backup failsafe 32-bit co-processor provides for manual recovery and has its own power supply
Socket for a plug in micro SD memory card for data logging and other uses

:Advanced sensor profile

3 axis 16-bit ST Micro L3GD20H gyro for determining orientation
3 axis 14-bit accelerometer and magnetometer for determining outside influences and compass heading
Provision for external magnetometer with automatic switch-over if desired
MEAS MS5611 barometric pressure sensor for determining altitude
Built in voltage and current sensing for battery condition determination
Connection for an externally mountable UBLOX LEA GPS for determining absolute position

:Extensive I/O interfaces with dedicated connectors

Fourteen PWM servo or ESC speed control outputs
Five UART (serial ports), one high-power capable, 2x with HW flow control
Two CAN I/O ports (one with internal 3.3V transceiver, one on expansion connector)
Spektrum DSM / DSM2 / DSM-X® Satellite reciever compatible input: Permits use of Spektrum RC Transmitters
Futaba S.BUS® compatible input and output
PPM sum signal & RSSI (PWM or voltage) input
I2C and SPI serial ports & Two 3.3 volt and one 6.6 volt Analog inputs

:Comprehensive power system with redundancy and extensive protection

The Pixhawk is supplied with an in line power supply with voltage and current sensor outputs
Ideal diode controller with redundant power supply inputs and automatic fail-over
Servo rail high-power (max. 10V) and high-current (10A+) ready
All peripheral outputs are over-current protected and all inputs ESD protected
The provided external safety button enables safe motor activation / deactivation
LED status indicators and driver for high brightness external multicolored LED to indicate flight status
High-power, multi-tone piezo audio indicator also informs of current flight status
Available high performance UBLOX GPS plus external Magnetometer in protective case
Documentation and User Guides

:Options

PPM encoder for RC receivers that do not provide PPM output
External USB and LED module for convenient status indicator and micro-USB port on your vehicle
Digital airspeed sensor for fixed-wing aircraft
Telemetry radios with one-mile range for two-way control, telemetry and datalogging via free mobile apps or PC/Mac/Linux ground station
u-blox GPS with compass (required for autonomous flight)

Specifications

:Processor

32-bit ARM Cortex M4 core with FPU
168 Mhz/256 KB RAM/2 MB Flash
32-bit failsafe co-processor

:Sensors

MPU6000 as main accel and gyro
ST Micro 16-bit gyroscope
ST Micro 14-bit accelerometer/magnetometer
MEAS barometer

:Power

Ideal diode controller with automatic failover
Servo rail high-power (7 V) and high-current ready
All peripheral outputs over-current protected, all inputs ESC protected

:Interfaces

5x UART serial ports, 1 high-power capable, 2x with HW flow control
Spektrum DSM/DSM2/DSM-X Satellite input
Futaba S.BUS input (output not yet implemented)
PPM sum signal
RSSI (PWM or voltage) input
I2C, SPI, 2x CAN, USB
3.3 and 6.6 ADC inputs

:Dimensions

Weight 38 g (1.3 oz)
Width 50 mm (2.0”)
Height 15.5 mm (.6”)
Length 81.5 mm (3.2”)
 
License | Schematic | Layout 
Learn more about open-source hardware

برچسب‌های محصول

برای جدا کردن برچسب‌ها از فاصله استفاده کنید. برای جملات نقل قول تکی (') را به کار ببرید.

نظر خودتان را بنویسید

فقط کاربران ثبت نام شده می توانند نظر ثبت كنند. لطفا, وارد سيستم شويد يا ثبت نام كنيد

اطلاعات اضافی

برند 3drobotics
وزن محصول (گرم) 38
جستجو-ویژگی N/A
اقلام همراه محصول N/A
Loading...